光纖斷點檢測器

 

特徵

●	Visual Fault Locator is used for locating broken point in fibers .
●	Visual Fault Locator is equipped with a 650-nm visible laser diode , can be operated in continuous or pulse modes for clear noticeable
●	One green LED indicator shows the operating mode .
●	Power switch on the end for battery on / off .
●	Push button operate CW / Mod. (2.5 Hz frequency) / pause .
●	Clip pocket-size pen design .
●	Protective cap for extra protection .
●	Low Battery Indicator: The Status LED will turn to red when batteries

 

說明

Central Wavelength	650 +/- 10 nm
Output Power	> 0.5mW into Single-mode fiber
Spectral Width	< 10 nm
Transmission	CW or 2.5 Hz pulse
Batteries	2 x AAA Alkaline batteries
Operating Temp.	0 - 50 ℃
Detecion Distance	< 6 Km
Dimension / Weight	13.5 mm X 170 mm / 88 g
Light Source	Class 3A laser diode
Suit for	φ1.25 mm / φ2.50 mm Ferrule